Quick Recovery RAID 5 is a do-it- yourself, non-destructive, simple and easy to use Raid data recovery software, supports IDE, EIDE, SCSI , SATA drives, long file name, having multi-disk and multi-lingual support, simulates previously existing partitions and is read-only i.e. the program will never attempt to write to the drive to recover. Its unique Guided File Excavation Technology (GFETch) helps in locating files and folders lost behind overwritten partitions and even if bad sectors hinder drive access. An exhaustive scan of the drive is performed to locate lost volumes. It recovers data from corrupted RAID configuration, failed/ bad Controller card, damaged/ deleted/ corrupted volumes even from initialized disks, Accidental resetting of array configuration, one damaged/ corrupted disk, damaged/ corrupted data, Not regenerating even after disk replacement, missing/corrupted Operating System or software failure, lost partition, missing drives, FAT/ MFT corruption, Array Format, corrupted partition/ volume, virus attack, and even from crashed drive. It also recovers data if the following situation occurs: Hardware RAID 5 : RAID Controller card has gone bad or the RAID configuration gets corrupted. File Deletion. Array Format. Partition Table related corruption. FAT corruption. MFT corruption etc. One RAID hard disk damaged. Not regenerating even after one disk replacement.Software RAID 5: File Deletion. Array Format. Partition Table related corruption. FAT corruption. MFT corruption etc.
Win 95/98/ME/NT/ 2000/XP/2003, Min 64Mb RAM (Recommended 128 Mb)